Description

The 5B / 5W / 5S Series is a high-performance 3 1/2 digit replacement LCD for many OEM DPMs. Available in snap-in, bezel or window mounting.

Features

◊ Low-cost, high-performance replacement for many OEM DPMs

◊ Optional Red or Green backlighting

◊ Mounting choices:

Window mount for custom OEM

Surface mount with minimum space behind the panel

Bezel mount using retaining clips

Snap-in bezel mount eliminates mounting hardware

◊ Low power: choice of 180µA (9V, ±5V) or 2.5mA (+5V)

◊ Space-saving design: only 1" (25 mm) deep

◊ Occupies less than 2.5 X 1.1 inches of front panel space

◊ 3 1/2 digits with high-contrast LCD

◊ Optional loop powered 4 to 20mA process inputs available: (See LPI-J1)

Specifications

   

Display:	Digits:	3 ½ digits (±1999 counts)
	Type:	0.5" (12mm) high-contrast reflective LCD
Backlighting:		Optional Red Negative (red numbers/black background) Optional Green Negative (green numbers/black background) Optional Green Positive (black numbers/green background)
	Polarity:	automatic, “-” displayed
	Decimal Points:	3 position, user selectable
	Overrange:	three lower order digits blank for inputs >1999 & <-1999
	Hold:	available OEM option, contact factory
Inputs:	Ranges:	±200.0mV, ±2.000V, ±20.00V DC
	Configuration:	bipolar & differential
	Protection:	±350 VDC, (±100 VDC on 200 mV range)
	Impedance:	>10 MΩ, (>1 MΩ on 20V range)
Performance:	Accuracy:	±(0.1% +1 count) typical ±(0.1% + 2 counts) maximum
	Conversion Rate:	2.5 per second
	Normal Mode Rejection:	>30 dB @ 60 Hz
	Common Mode Range:	±1 VDC
	Common Mode Rejection:	>86 dB
	Zero Adjustment:	automatic
	Warmup:	10 minutes typical
	Temperature Coeff.:	± 100 ppm per °C typical
Environment:	Operating Range:	0 to 50 °C
	Storage Range:	-20 to 70 °C
Power Supply:	5V powered:	+5V DC (±5%) at 2.5 mA
	9V(±5V) powered:	+7.2 to +12 V at 180 µA
	Optional Backlight:	+5V DC at 100 mA typical
Mounting:	5W:	surface or window mount
	5B:	bezel mount with retaining clips
	5S:	snap-in bezel mount
Connection:	5W, 5B, 5S:	13 pins, 0.025" square on 0.1" centers - pin 3 missing

Ordering Information