Description

The Model CVC is a portable calibrator designed to meet the requirements of field calibration, testing, and troubleshooting of transducers, transmitters, actuators, and other process and control devices.

The Model CVC features a large, 0.59” (15 mm), LCD numerical display, with blue backlighting for use in dimly lit areas. Powered by a readily available standard 9V battery, it also comes with a 120V AC plug-in power supply for bench-top use.

Features

◊ 0.0 to 20.0 mA DC output in 1.0 mA steps

◊ 0.0 to 10.0 V DC output in 1.0 V steps

◊ Three output modes automatically selected by plug location

◊ Simulate using external loop supply (30 V DC Maximum)

◊ Source using internal 9V battery

◊ Voltage output

◊ Auto-Ramping with user adjustable minimum & maximum output values

◊ User adjustable ramp step time, 1 to 20 seconds, in 1 second increments

◊ User adjustable Auto-power-off time from 1 to 20 minutes in 1 minute increments

◊ 3-Position bail for pocket, hanging, or bench-top use

◊ Complete with :    

9V battery    

120 VAC plug-in power supply    

Test leads with alligator clips    

Carrying case

Specifications

   

Outputs:	Ranges:	Current:	0.0 to 20.0mA DC in 1mA steps
		Voltage:	0.0 to 10.0V DC in 1V steps
	Accuracy at 25°C:	Current:	+/- 0.05mA DC
		Voltage:	+/- 0.05V DC
	Load Impedance:	Current:	300 ohms maximum
		Voltage:	1000 ohms minimum
	External mA Transmitter Source:	Voltage:	12V minimum to 30V peak maximum
Ramping	Manual:		anywhere in range
	Auto:	Values:	user adjustable min. & max. values anywhere within range
		Step Time:	user adjustable from 1 to 20 seconds, in 1 second increments
Display:	Numerical:		LCD, 00.0 to 99.9, 0.59” H (15 mm)
	Annunciators:		“RAMP”, “OVER LOAD”, “mA”, “V”, “TIME”, and symbol for low battery
	Blue Backlight:		energized with momentary side switch
Environmental:	Operating temperature:		32 to 122°F (0 to 50°C)
Power:	9V Battery:		NEDA1604, JIS006P, or IEC6F22 (Duracell MN1604 or equivalent); up to 30 hours continuous use
	Low Battery:		indicator comes on below approximately 7 volts
	120 VAC:		plug-in 9VDC output supply for bench-top use
	Auto Power Off:		user adjustable delay time from 1 to 20 minutes after last key press can also be disabled
Physical:	Dimensions:		5.5”H x 2.5”W x 1.4”D (140H x 63.5W x 35.6D mm)
	Weight:		6 oz (170 g)

Ordering Information

Please reference part number on the left when ordering. We can be reached through our CONTACT US page. Call for pricing and quantity discounts.
Model#: CVC	Included:	Calibrator
		9V battery
		VAC plug-in power supply
		Test leads with alligator clips
		Nylon carrying case