1-800-356-4920 (USA) 1-603-471-0158 (Int'l)
Cart 0

LPI-1T

LPI-1T
  • Space-saving design only 1.4”(35.6mm) deep
  • Occupies less than 2.5 x 1.1 inches of front panel space
  • High-contrast LCD
  • 3 1/2 digits with 0.39” LCD
  • Snap-In bezel eliminates the need for mounting hardware
  • User-selectable decimal points
  • Process input (4 to 20mA) interface board with multi-turn SPAN (GAIN) and ZERO (OFFSET) adjustments
  • Loop-powered

Display:  Digits: 3 ½ digits (±1999 counts)
  Type:  0.39” (10mm) high contrast reflective LCD
  Polarity: automatic, “-” displayed
  Decimal Points:  3 position, user selectable
  Overrange: three lower order digits blank for inputs >1999 & <-1999
Inputs: Ranges: process inputs, 4 to 20mA 
  Configuration: bipolar, differential
  Protection: 30 mA max.
  Loop Burden: 300Ω nominal@20mA DC (loop powered) 
Performance: Accuracy: ±(0.1% +1 counts) typical
±(0.2% + 2 counts) maximum
  Conversion Rate:  3 per second
  Normal Mode Rejection: >30 dB @ 60 Hz
  Adjustments: automatic
  Warmup:  10 minutes typical
  Temperature Coeff.: ±100 ppm per °C typical 
Environment: Operating Range:  0 to 50 °C
  Storage Range: -10 to 60 °C
Power Supply:   powered by the 4-20mA current loop
Mounting: LCD: snap-in bezel mount 
  Process Board:  plugs onto DPM pins, adds approx. 0.6”(16mm) to depth
Connection:   screw terminals on process board