1-800-356-4920 (USA) 1-603-471-0158 (Int'l)
Cart 0

LPI-J1

LPI-J1
  • Low-cost, high-performance replacement for many OEM DPMs
  • Snap-in bezel mount eliminates mounting hardware
  • Resistant to RF and EMI
  • 3 1/2 digits with high-contrast LCD
  • 4- 20 mA  loop-powered input

Display:  Digits: 3½ digits (±1999 counts)
  Type:  0.5" (12 mm) 7 segment LCD
  Polarity:  automatic, “-” displayed 
  Decimal Points:  3 position, user selectable
  Overrange: three lower order digits blank for inputs >1999 & <-1999
Inputs:  Ranges:  4-20mA DC
  Configuration: bipolar differential
  Protection: 30 mA max
  Loop Burden: 300 Ω nominal
Performance: Accuracy: (0.1% fs + 2 count)
  Conversion Rate:  3 per second
  Normal Mode Rejection: >30 dB @ 60 Hz
  Adjustments: span (gain) and zero (offset) 
  Warmup:  10 minutes typical
  Temperature Coeff.: ± 100 ppm per °C typical
Environment: Operating Range:  0 to 50 °C
  Storage Range: -10 to 70 °C
Power Supply:   powered by the milliamp control loop
Mounting:   snap-in bezel mount 
Connection:   2 screw terminal